An older single-storey house with white walls and a brick chimney, with a wide green lawn and trimmed shrubs on a sunny day
Hub - Selling After a Life Change/
Save

Selling a House With a Buried Oil Tank in BC: What to Tell Buyers and What to Do First

Some older BC houses were once heated with oil, and the tank may still be in the ground. This guide explains what a seller must disclose, how a tank is found and removed, what papers a buyer's lawyer asks for, and how to plan a sale when the tank is still there.

Michael Goering, BC-licensed REALTOR®

Michael Goering·BC-licensed REALTOR®

Some older houses in BC were heated with oil. When gas or electric heat arrived, the furnace was replaced and the tank was left where it was, sometimes buried in the yard. Decades later the owner wants to sell, and a buyer asks about the tank. This guide explains what a seller has to disclose, how a tank is dealt with, and how to plan the sale.

It is general information. Your city sets the local rules for tanks, and a lawyer advises on the contract.

Do you have to tell a buyer about the tank?

Yes. BC Financial Services Authority (BCFSA) regulates real estate agents in BC. Its consumer guide to oil tanks answers the question directly for a seller who knows there is an old tank in the yard: if the tank is leaking or causing any damage to the property, it may be a material latent defect, and material latent defects must be disclosed to potential buyers before you enter into a contract with them.

BCFSA defines a material latent defect as a defect that cannot be discerned through a reasonable inspection of the property. Its list of common examples includes "underground storage tanks located on the property".

A real estate agent has a wider duty than the seller. BCFSA says a licensee must also disclose a defect that would involve great expense to remedy, and a circumstance about which a local government has given the seller a notice that it must or should be remedied. If a seller does not disclose a material latent defect, the licensee must make the disclosure themselves. If a seller instructs the licensee to stay silent, the licensee must stop acting for that seller.

So a known tank is disclosed. The useful question is how to disclose it in a way that keeps the sale.

What if you do not know whether there is a tank?

A seller who bought the house decades ago may never have been told. These signs suggest a tank was once there:

  • the house was built when oil heating was common in the area
  • a filler pipe or a vent pipe stands near an outside wall
  • small copper lines enter the basement near the furnace
  • a patch in the lawn or the driveway has settled

A tank locating company can scan the yard and give a written report. In our view this is worth doing before the house is listed. A buyer in an area known for old tanks will ask, and a report gives the answer on the day they ask.

On a disclosure form, answer what you know and say plainly what you do not know. BCFSA says it is best practice to complete the property disclosure statement accurately and to the best of your knowledge.

What are a seller's choices?

ChoiceWhat it needsWhat to check
Remove the tank before listingA licensed contractor, time, and money nowThe city's permit rules, soil test results, the written report
Sell with the tank disclosed, and remove it before completionA clause in the contract and a contractor bookedWhat happens if the soil is contaminated
Sell with the tank disclosed, and agree on a holdbackPart of the sale money kept back until the work is doneThe amount, the deadline, and who chooses the contractor
Sell as it is, at a lower priceA buyer willing to take the riskThe buyer's lender and insurer

BCFSA's guide for buyers mentions two of these tools. It says a buyer can add subjects to an offer, such as having an environmental engineer inspect the area, and can include a holdback to deal with possible remediation if a tank is found. A holdback is money from the sale price that a lawyer or notary keeps until the agreed work is finished.

In our view, removing the tank before listing is the simplest route when the owner can afford it. The buyer sees a finished problem with papers, and the price is set on a house with no question attached. When money is short, a holdback lets the sale itself pay for the work.

How is a tank removed?

The steps usually run in this order. Check your own city's rules first, because permits and inspections are local.

  1. Call the city or the fire department. Ask whether a permit is needed and who inspects the work.
  2. Hire a contractor who does tank removals. Ask for proof of insurance and for a sample of the report they give at the end.
  3. The tank is pumped out, removed and taken away. The contractor looks at the soil under and around it.
  4. Soil samples go to a laboratory. The results show whether oil leaked.
  5. If the soil is clean, the hole is filled and the contractor writes a report.
  6. If oil leaked, the contaminated soil is dug out and replaced, and more samples are taken until the results are clean.

Keep every paper: the permit, the inspection record, the laboratory results and the contractor's report. Give copies to your agent before the listing goes live.

What if the tank leaked?

A leak changes the cost and the timing, and it cannot be known until the tank is out. Three steps help.

  • Tell your home insurer and ask in writing whether any part of the cleanup is covered.
  • Ask the contractor for a written scope before more digging starts, with a price for each stage.
  • Tell your agent. A leak is the case BCFSA names as a possible material latent defect, and it must be disclosed, with the cleanup papers, to any buyer.

A finished cleanup with laboratory results is something a buyer can accept. An open one is hard to sell, because nobody can name the final cost.

How does the tank affect the buyer's side?

A buyer has two other parties to satisfy: the lender and the home insurer. Either one may ask whether a tank is present and for proof of what was done with it. A buyer who cannot get a mortgage or insurance cannot complete, whatever price was agreed. Our guide to a house an insurer will not cover explains this from the seller's side, and our post for buyers on underground oil tanks shows what a careful buyer checks.

Written records answer these questions. A buyer's lawyer reads the removal report and the soil results, and a lender or insurer may ask to see them.

How should the contract deal with a tank?

Your lawyer and your agent write the wording. These are the points to settle.

  1. What the seller states. For example, that a tank was removed on a given date by a named contractor, with the report attached.
  2. What work is still to be done, by whom, and by what date.
  3. The holdback, if there is one: the amount, who holds it, and what releases it.
  4. What happens if contamination is found after the contract is firm.
  5. The completion date, with room for the work.

What if you are selling for an estate or a parent?

An executor or an attorney often has never lived in the house and has no papers. Look for a furnace service record or an old heating bill, ask the neighbours what their houses had, and order a scan. BCFSA says a seller who cannot make representations about a property can use a Property No Disclosure Statement, and it warns that this may put a seller at risk of litigation later if latent defects are found that the seller knew about and failed to disclose. A tank you know about is disclosed either way. Our guide to selling a parent's home covers the rest of an estate sale.

Each property is different. Confirm the local rules with your city and the contract wording with a lawyer before you sign.

Next step

Ask us for a free home value. A BC-licensed REALTOR® will email a price range based on recent sales of homes like yours, and we can talk through the tank before you decide what to do. You do not have to sell with us. Our guide to selling after a life change covers other situations.

Questions we get

Frequently asked questions

Do I have to tell a buyer about an oil tank on my property in BC?

Yes. BC Financial Services Authority says that if an oil tank is leaking or causing any damage to the property, it may be a material latent defect, and that material latent defects must be disclosed to potential buyers before you enter into a contract. It lists underground storage tanks as a common example.

What is a material latent defect?

BC Financial Services Authority defines it as a defect that cannot be discerned through a reasonable inspection of the property, including one that makes the property dangerous to the occupants or unfit to live in. A real estate agent must also disclose a defect that would involve great expense to remedy.

Say what you know and what you do not know. If the house was built when oil heating was common, a tank scan by a locating company gives a written answer before a buyer asks. A seller who answers a disclosure form must answer accurately and to the best of their knowledge.

In our view, yes, when you have the time and the money. A buyer's lender and insurer may ask for proof that the tank is gone, and a removed tank with clean soil results takes the question out of the sale. If you cannot, disclose the tank and agree on a plan with the buyer.

The buyer and the seller decide in the contract. A seller can remove the tank before completion, or the buyer can ask for a holdback, which is part of the sale money kept back until the work is done. BC Financial Services Authority mentions a holdback for possible remediation as one condition a buyer can ask for.

A buyer's lawyer can ask for the contractor's removal report, any permit and inspection record from the city or the fire department, and the laboratory results for the soil under and around the tank. Keep the originals and give copies to your agent before the house is listed.

Then the soil has to be cleaned, and the cost depends on how far the oil spread. Tell your insurer and ask whether the policy covers any of it. A leak is the case BC Financial Services Authority names as a possible material latent defect, so it must be disclosed.

A buyer whose offer has a condition about the tank can decline to remove that condition. BC Financial Services Authority says a buyer can add subjects to an offer, such as an inspection of the area by an environmental engineer. A firm contract with full disclosure is harder to leave.

BC Financial Services Authority says a seller can use that form when they cannot or do not wish to make representations. It warns that this may put a seller at risk of litigation later if latent defects are found that the seller knew about and failed to disclose. A known tank still has to be disclosed.

Yes. BC Financial Services Authority says that if a seller does not disclose a material latent defect, the licensee must make the disclosure themselves. If a seller instructs the licensee not to disclose, the licensee is obligated to stop providing trading services to that seller.

Sources

  1. Consumer Guide to Oil Tanks, BC Financial Services Authority (Accessed 2026-11-20)
  2. Material Latent Defects, BC Financial Services Authority (Accessed 2026-11-20)
  3. Material Latent Defects Guidelines, BC Financial Services Authority (Accessed 2026-11-20)
  4. Listing Your Home, BC Financial Services Authority (Accessed 2026-11-20)
Part of a guide

Selling after a life change

30 pieces that fit together. Read them in order, or jump to the one you need.

End of article

Found this useful? Share it.

A neighbour, a partner, a friend who's two FHSA contributions away, send it their way.

Save